Information page XADO technology repairing engine [ "XADO-technology" ]

Products

Material Safety Data Sheet (Gel)


XADO Gel Material Safety Data Sheet (Gel)

Section 1

Product description		XADO Gel
Class designation/chemical		Industrial lubricating oil with mineral additives
Formulation		industrial oil and additives
Manufacturer's name		XADO Corp.
Address		Kharkov, Ukraine, 4 23rd Avgusta Lane fax: 8-10-38-0572-185-499 tel: 8-10-38-0572-185-488

Section 2 Dangerous components

Dangerous components		Minerals-containing dust
When used normally no mineral-containing dust is detected in the air.

Section 3 Health hazards

MAC of dust in the air of the working zone		6mg/m³, Safety Class 4
Radiation control		1 Class of Classification Unrestricted use
Continuous or repeated contact will not cause skin irritation. Eye contact with the product can cause irritation.

Section 4 Actions in case of an accident and first aid

Eye contact: rinse with pure water until the irritation stops; if the irritation persists, seek medical aid. Skin contact: rinse with pure soapy water. Inhalation: inhalation will not cause irritation. Ingestion: if swallowed, seek medical aid; do not suppress vomiting.

Section 5 Ignition and explosive data

Flash point in open crucible, ^oÑ, at least		170
Extinguishing methods		in case of fire all methods of fire-fighting are applicable except water
Special fire-fighting methods		-
Unusual flame and explosive hazard		explosion-proof

Section 6 Physical and chemical properties

Melting point(with agitation),^oÑ		65170
Density at 20 ^oC, kg/m³		887,9
Drop point, ^oÑ		44
Sedimentation stability at 40 ^oC, %		100
Particle size, micron		5
Corrosive attack on metals		Withstands
Water content, % (by mass)		none
Appearance and odor		gel with fruit smell

Section 7 Reactivity data

Contact with alkalis, acids or water must be avoided. Sand and other abrasive substances are not tolerated amongst mechanical impurities.

Section 8 Spillage or leakage

Steps to be taken in case material is released or spilled. Recover gel wash remainder with suitable petroleum solvent or add absorbent. Keep out of sewers and water courses. Advise authorities if product has entered or may enter sewers and water couses.

Section 9 Information on special protection

Respirator		not required
Ventilation		local or centralized plenum-exhaust ventilation
Protective gloves		not required
Eye protection		if eye contact is likely, wear goggles
Other safeguards		not required

Section 10 Special precautions

The precautions, which should be observed during transportation and storage: keep containers closed, if not in use; never carry or storage near sources of heat, sparkes, flame and strong oxidants. Further precautions: Carefully cleanse (wash) the skin after contact.

Grounds

Health Report No. 63, dated 20.10.1999, of Commission of Sanitary and Hygienic Experts on home-made products Report No. 85, dated 20.10.1999, of Commission of Sanitary and Hygienic Experts on normative documentation Radiation Certificate No. 09/ÇÁ-2000, dated 25.02.2000 Raw and Building Materials Quality Sheet No. 93, dated 25. 02.2000

Technical Director		S. N. Aleksandrov
Chief Product Engineer		A. F. Velikaya

[Technology] [Products] [Consultations] [Links] [News] [Map] [Contact]